- Mta 6328 2re Firmware Download Torrent
- Mta 6328 2re Firmware Download Version
- Innomedia Mta 6328-2re Firmware Download
- Mta 6328 2re Firmware Download Flash Tool
Tony hawk pro skater 1 2. The widely deployed 2-voice-port standalone MTA 6328-2Re is an ideal solution for broadband service providers looking to deploy new revenue-generating telephony services to their customers. Compatible with any standard analog telephone set, the MTA 6328-2Re delivers wide-band voice with quality superior to that of PSTN. MTA XT 6328-2Re Phone Fax PC Standard Telephone Cable (RJ-11) Power RJ-45 port. AC/DC power adapter Software Specifications Category Specification Protocols SIP 2.0, MGCP 1.0, NCS 1.0 Speech Codec Capabilities G.711 and one of the following. Offers Web-based access as well as TFTP-based remote software downloads/upgrades Provisionable.
Hi,I am fairly new to SS. I am trying to setup GV-Gizmo5-SS and am unable to get it working correctly on my innomedia ATA
however fring works just fine from the same Access point with the same SS account.
i am running
Image Version : V3.0.38
BBS Version : V7.2.8
Controller Code Version : V3.10.37 SIPMTA 6328-R Nov 16 2005 19:46:23
DSP Code Version : V2.4.11 11/14 22:09 2005
SIP Stack Version : V2.9.100
![Mta Mta](https://www.picclickimg.com/d/l400/pict/233585918539_/Netgear-R6080-AC1000-Dual-Band-Wi-Fi-Router-Black.jpg)
on my ATA,
these are the settings on Innomedia for sip
SIP_Settings> p
Current SIP Proxy Servers = 69.59.142.213:2060
Use Outbound Proxy = No
Current Local SIP Port = 5060
Response Code for Retry Registration =
Retry Registration Interval = 60 seconds
Current SIP Domain =
Current Exponential Backoff = 500 ms
Current Exponential Cap = 2000 ms
Current Non-INVITE retry = 4 times
Current INVITE msg retry = 4 times
Current REGISTER expiration = 600 seconds
Current Session Timer = 0 seconds
Current Bullet Interval = 0 seconds
Current Number of Codecs = 1
Current Codec List = G711(PCMU)
Digitmap Partial Match Timeout = 16
Digitmap Critical Timeout = 4
Cancel Call Waiting Invoke String = *70
Call Transfer Invoke String = *90
CID Block Invoke String = *67
Call Park Invoke String = *98
Call Retrieve Invoke String = *99
Outside Line Access Number = 9
Use User-Agent Header = No
Set Jitter Buffer Adaptive = No
Use SIP INFO for DTMF = Yes
Re-registration Credential Enable = No
Current SIP PING Interval = 0 seconds
Current SIP PING Proxy Require Header =
Current SIP External IP address =
logs from ATA
********************SLAC_OP_CH_ACTIVE 0
proxy[0]=69.59.142.213:2060
UA#1 prx filter[0]=69.59.142.213:2060
ch2: xxxxxx1 Sign In Ok! (ticks:15227)
ch1: Sign In Ok! (ticks:16327)
rtime=20, pSM->FrameTime=10, pSM->RxPacketization=20, RxFramesPer=2
****pSM->VoiceFrameLength=80,pSM->CodecType=0
****pSM->TxFramesPerPacket=2,pSM->TxPacketization=20
is_fax_pending:bad ch:0,t38_fax_enable:0
IM_Set_NAT_Throughput
Reserved Bandwidth for voice up:85 down:85
ch = 0,Get the event 0x2
sync with DSP
IM_Set_NAT_Throughput
Reserved Bandwidth for voice up:0 down:0
fast path enabled
proxy[0]=69.59.142.213:2060
Mta 6328 2re Firmware Download Torrent
UA#0 prx filter[0]=69.59.142.213:2060ch1: xxxxxx2 Sign In Ok! (ticks:19527)
logs from SS console
Monitor 16:11:07:011: basetype=console, ipaddress=*, user=xxxxx, event=*, request=*, serveripaddress=*, server=*, regex=.*.
Registrar 16:11:45:541 sip1: Authentication required for xxxxx@sipsorcery.com from udp:122.181.155.28:5060.
Registrar 16:11:45:979 sip1: Binding update request for xxxxx@sipsorcery.com from udp:122.181.155.28:5060, expiry requested 180s granted 180s.
RegisterSuccess 16:11:46:026 sip1: Registration successful for xxxxx@sipsorcery.com from udp:122.181.155.28:5060 (proxy=udp:69.59.142.213:2060), expiry 180s.
DialPlan 16:11:49:213 sip1: New call from udp:122.181.155.28:5060 successfully authenticated by digest.
DialPlan 16:11:49:244 sip1: Using dialplan default for Out call to sip:18004322737@69.59.142.213:2060.
NewCall 16:11:49:260 sip1: Executing script dial plan for call to 18004322737.
DialPlan 16:11:49:369 sip1: ** Call from 'xxxxxx xxxxxx' ;tag=ACA8286B13C4-805487280 to 18004322737 **
DialPlan 16:11:49:369 sip1: Calling 18004322737 via Google Voice
DialPlan 16:11:49:385 sip1: SDP on GoogleVoiceCall call had public IP not mangled, RTP socket 172.168.40.107:10000.
DialPlan 16:11:49:385 sip1: UAS call progressing with Ringing.
DialPlan 16:11:49:400 sip1: Logging into google.com for xxxxx@gmail.com.
DialPlan 16:11:49:432 sip1: Google Voice pre-login page loaded successfully.
DialPlan 16:11:49:447 sip1: GALX key zNUI1TXOi2I successfully retrieved.
DialPlan 16:11:50:307 sip1: Google Voice home page loaded successfully.
DialPlan 16:11:50:322 sip1: Call key AOLAKgcU4yL1MDlhQShFYlr44cs= successfully retrieved for xxxxxx.xxxxxx@gmail.com, proceeding with callback.
DialPlan 16:11:50:338 sip1: SIP Proxy setting application server for next call to user xxxxx as udp:69.59.142.213:5070.
DialPlan 16:11:50:494 sip1: Google Voice Call to 18004322737 forwarding to 17471740497 successfully initiated, callback timeout=30s.
DialPlan 16:11:50:838 sip1: SIP Proxy directing incoming call for user xxxxxx to application server udp:69.59.142.213:5070.
DialPlan 16:11:50:854 sip1: Google Voice Call callback received.
DialPlan 16:11:50:854 sip1: Answering client call with a response status of 200.
DialPlan 16:11:50:994 sip1: Google Voice Call was successfully answered in 1.61s.
DialPlan 16:11:51:338 sip1: Dial plan execution completed with normal clearing.
Mta 6328 2re Firmware Download Version
DialPlan 16:12:02:916 sip1: Matching dialogue found for BYE to sip:69.59.142.213:5060 from udp:69.59.142.213:5060.Registrar 16:12:17:775 sip1: Authentication required for xxxxxx@sipsorcery.com from udp:122.181.155.28:5060.
DialPlan 16:12:17:791 sip1: No dialogue matched for BYE to sip:69.59.142.213:2060.
Registrar 16:12:18:072 sip1: Binding update request for xxxxxx@sipsorcery.com from udp:122.181.155.28:5060, expiry requested 180s granted 180s.
Innomedia Mta 6328-2re Firmware Download
RegisterSuccess 16:12:18:119 sip1: Registration successful for xxxxxx@sipsorcery.com from udp:122.181.155.28:5060 (proxy=udp:69.59.142.213:2060), expiry 180s.
calls drops randomly anywhere between 20sec to 1 minute.
I am also not able to use DTMF while the call is on..
can any of you suggest what the problem is?
Mta 6328 2re Firmware Download Flash Tool
or my ATA has gone bad? its a Sunrocket ata with OEM firmware installed.thanks alot for all the help..
![Install Install](http://i89.photobucket.com/albums/k217/hotrad/Public%20Hotrad/mjinfoerror.jpg)
MTA 6328-2Re Specifications Next Generation VoIP CPE Devices For Broadband Service Providers |
Features| Specifications |Datasheet |
A. | Power |
B. | RJ-45 port (uplink to broadband access device) |
C. | RJ-45 (downlink to PC) |
D. | RJ-11 port (connect to phone) |
Product Specifications
Category | Specifications |
---|---|
Telephone Interface | 2 FXS voice ports |
Network Interface | 10/100 Base-T RJ-45 Uplink and Downlink ports |
Accessory | Ethernet Cable, AC/DC Power Adapter |
![Firmware Firmware](https://www.innomedia.com/wp-content/uploads/2013/09/mta6328re_blk_port-turn.jpg)
on my ATA,
these are the settings on Innomedia for sip
SIP_Settings> p
Current SIP Proxy Servers = 69.59.142.213:2060
Use Outbound Proxy = No
Current Local SIP Port = 5060
Response Code for Retry Registration =
Retry Registration Interval = 60 seconds
Current SIP Domain =
Current Exponential Backoff = 500 ms
Current Exponential Cap = 2000 ms
Current Non-INVITE retry = 4 times
Current INVITE msg retry = 4 times
Current REGISTER expiration = 600 seconds
Current Session Timer = 0 seconds
Current Bullet Interval = 0 seconds
Current Number of Codecs = 1
Current Codec List = G711(PCMU)
Digitmap Partial Match Timeout = 16
Digitmap Critical Timeout = 4
Cancel Call Waiting Invoke String = *70
Call Transfer Invoke String = *90
CID Block Invoke String = *67
CID Display Invoke String = *82
Call Park Invoke String = *98
Call Retrieve Invoke String = *99
Outside Line Access Number = 9
Use User-Agent Header = No
Set Jitter Buffer Adaptive = No
Use SIP INFO for DTMF = Yes
Re-registration Credential Enable = No
Current SIP PING Interval = 0 seconds
Current SIP PING Proxy Require Header =
Current SIP External IP address =
logs from ATA
********************SLAC_OP_CH_ACTIVE 0
proxy[0]=69.59.142.213:2060
UA#1 prx filter[0]=69.59.142.213:2060
ch2: xxxxxx1 Sign In Ok! (ticks:15227)
ch1: Sign In Ok! (ticks:16327)
rtime=20, pSM->FrameTime=10, pSM->RxPacketization=20, RxFramesPer=2
****pSM->VoiceFrameLength=80,pSM->CodecType=0
****pSM->TxFramesPerPacket=2,pSM->TxPacketization=20
is_fax_pending:bad ch:0,t38_fax_enable:0
IM_Set_NAT_Throughput
Reserved Bandwidth for voice up:85 down:85
ch = 0,Get the event 0x2
sync with DSP
IM_Set_NAT_Throughput
Reserved Bandwidth for voice up:0 down:0
fast path enabled
proxy[0]=69.59.142.213:2060
Mta 6328 2re Firmware Download Torrent
UA#0 prx filter[0]=69.59.142.213:2060ch1: xxxxxx2 Sign In Ok! (ticks:19527)
logs from SS console
Monitor 16:11:07:011: basetype=console, ipaddress=*, user=xxxxx, event=*, request=*, serveripaddress=*, server=*, regex=.*.
Registrar 16:11:45:541 sip1: Authentication required for xxxxx@sipsorcery.com from udp:122.181.155.28:5060.
Registrar 16:11:45:979 sip1: Binding update request for xxxxx@sipsorcery.com from udp:122.181.155.28:5060, expiry requested 180s granted 180s.
RegisterSuccess 16:11:46:026 sip1: Registration successful for xxxxx@sipsorcery.com from udp:122.181.155.28:5060 (proxy=udp:69.59.142.213:2060), expiry 180s.
DialPlan 16:11:49:213 sip1: New call from udp:122.181.155.28:5060 successfully authenticated by digest.
DialPlan 16:11:49:244 sip1: Using dialplan default for Out call to sip:18004322737@69.59.142.213:2060.
NewCall 16:11:49:260 sip1: Executing script dial plan for call to 18004322737.
DialPlan 16:11:49:369 sip1: ** Call from 'xxxxxx xxxxxx' ;tag=ACA8286B13C4-805487280 to 18004322737 **
DialPlan 16:11:49:369 sip1: Calling 18004322737 via Google Voice
DialPlan 16:11:49:385 sip1: SDP on GoogleVoiceCall call had public IP not mangled, RTP socket 172.168.40.107:10000.
DialPlan 16:11:49:385 sip1: UAS call progressing with Ringing.
DialPlan 16:11:49:400 sip1: Logging into google.com for xxxxx@gmail.com.
DialPlan 16:11:49:432 sip1: Google Voice pre-login page loaded successfully.
DialPlan 16:11:49:447 sip1: GALX key zNUI1TXOi2I successfully retrieved.
DialPlan 16:11:50:307 sip1: Google Voice home page loaded successfully.
DialPlan 16:11:50:322 sip1: Call key AOLAKgcU4yL1MDlhQShFYlr44cs= successfully retrieved for xxxxxx.xxxxxx@gmail.com, proceeding with callback.
DialPlan 16:11:50:338 sip1: SIP Proxy setting application server for next call to user xxxxx as udp:69.59.142.213:5070.
DialPlan 16:11:50:494 sip1: Google Voice Call to 18004322737 forwarding to 17471740497 successfully initiated, callback timeout=30s.
DialPlan 16:11:50:838 sip1: SIP Proxy directing incoming call for user xxxxxx to application server udp:69.59.142.213:5070.
DialPlan 16:11:50:854 sip1: Google Voice Call callback received.
DialPlan 16:11:50:854 sip1: Answering client call with a response status of 200.
DialPlan 16:11:50:994 sip1: Google Voice Call was successfully answered in 1.61s.
DialPlan 16:11:51:338 sip1: Dial plan execution completed with normal clearing.
Mta 6328 2re Firmware Download Version
DialPlan 16:12:02:916 sip1: Matching dialogue found for BYE to sip:69.59.142.213:5060 from udp:69.59.142.213:5060.Registrar 16:12:17:775 sip1: Authentication required for xxxxxx@sipsorcery.com from udp:122.181.155.28:5060.
DialPlan 16:12:17:791 sip1: No dialogue matched for BYE to sip:69.59.142.213:2060.
Registrar 16:12:18:072 sip1: Binding update request for xxxxxx@sipsorcery.com from udp:122.181.155.28:5060, expiry requested 180s granted 180s.
Innomedia Mta 6328-2re Firmware Download
RegisterSuccess 16:12:18:119 sip1: Registration successful for xxxxxx@sipsorcery.com from udp:122.181.155.28:5060 (proxy=udp:69.59.142.213:2060), expiry 180s.
calls drops randomly anywhere between 20sec to 1 minute.
I am also not able to use DTMF while the call is on..
can any of you suggest what the problem is?
Mta 6328 2re Firmware Download Flash Tool
or my ATA has gone bad? its a Sunrocket ata with OEM firmware installed.thanks alot for all the help..
MTA 6328-2Re Specifications Next Generation VoIP CPE Devices For Broadband Service Providers |
Features| Specifications |Datasheet |
A. | Power |
B. | RJ-45 port (uplink to broadband access device) |
C. | RJ-45 (downlink to PC) |
D. | RJ-11 port (connect to phone) |
Product Specifications
Category | Specifications |
---|---|
Telephone Interface | 2 FXS voice ports |
Network Interface | 10/100 Base-T RJ-45 Uplink and Downlink ports |
Accessory | Ethernet Cable, AC/DC Power Adapter |
Software Specifications
Category | Specifications |
---|---|
Protocols | SIP 2.0, MGCP 1.0, NCS 1.0 |
Speech Codec Capabilities | G.711 and one of the following: G.726 G.723.1; G.729A (Low bit rate codecs) Supports 3-way conferencing with compression |
Quality of Service | IEEE 802.1p/q; IP TOS Tagging; Built-in Priority Switch; Data Bandwidth Control; Adaptive jitter buffer |
Signal Processing | Echo cancellation Silence suppression T.38 Fax (or fall-back to G.711) Caller ID FSK signal regeneration Line reversal/Polarity reversal 16Khz metering pulse (MGCP only) |
Certification | FCC part 15B; CE; UL |
Tones | Ring back tone Busy tone Reorder tone Dial tone Off hook warning tone Message waiting tone (MWI)/Stutter tone Call waiting tone |
DTMF Tone | DTMF tone detection and generation/RFC2833 |
Announcements | Play out any voice stream sent by Call Agent or SIP Proxy controlled announcement server Device IP announcement |
OAM&P | Access components implemented: CLI, TFTP, HTTP 1.0, SNMP, Telnet, DHCP or DNS, HTTPS (available soon) Works with any SNMP (v.1, v.2c, v.3)-based EMS Offers web-based access as well as HTTP, Secured HTPP, or TFTP-based remote software downloads/upgrades Provisionable set feature codes |
Other Features | Built-in DHCP server NAT capabilities for simultaneous Internet access for multiple PC's IP routing and port forwarding MAC cloning IP/Domain filtering STUN NAT traversal SIP TLS over TCP Multiple Line Profiles (SIP only) DSCP (Diffserv Codepoint) (SIP only) VLAN Tagging SIP INFO for DTMF/Flash Event SIP Notify for Flash Event SIP PING SIP PRACK RTCP-XR (SIP only) |
Physical Specifications
Category | Specifications |
---|---|
Power Consumption | Idle: 12V/0.19A (2.28W) / Talking: 12V/0.28A (3.36W) |
Power Supply | Output: DC 12V, 1A / Input: AC 120V, 60Hz, 200mA |
Dimensions | 1.18 in (H) x 4.60 in (W) x 5.12 in (D) / 30 mm (H) x 117 mm (W) x 130 mm (D) |
Operating Temperature | 32ºF to 104ºF (0ºC to 40ºC) |
Storage Temperature | -4ºF to 158ºF (-20ºC to 70ºC) |
Operating Humidity | 10 to 90% RH |
Storage Humidity | 5 to 95% RH |